Discover smarter ways to install your T Connector efficiently with pro tips that boost accuracy, reduce errors, and save installation time.
Learn the key differences between JIC, NPT, and ORFS hydraulic fittings for leak-free and high-pressure performance.
Explore why flanged fittings are essential to Hydraulic Systems, boosting durability, preventing leakage, and improving overall performance.
Discover essential Pipe Fittings for plumbing, industrial, and HVAC systems. Learn types, materials, and real-world applications today.
Discover key Hydraulic Connector Parameters, their impact on system efficiency, and expert tips for safe and reliable hydraulic operation.
Explore key Hydraulic Fittings Standards (GB/T, ASME, DIN) and learn how they ensure safety, precision, and durability in systems.
Contact us to help you solve problems related to hydraulic connectors and other products
Replace the hydraulic joint with a new one and thoroughly clean the welding slag and oil stains inside the pipe with kerosene or anhydrous ethanol before installation to ensure that the sealing surface is free of impurities.
Surface strengthening treatment:
Plated with hard chromium (thickness ≥ 0.02mm) or coated with molybdenum disulfide lubricant (suitable for working conditions of -20~200 ℃) at the thread;
The key parts are made of stainless steel material (such as 316L), and there is no corrosion after salt spray testing for ≥ 720 hours.
Suggestions for rust prevention management:
Install a moisture-proof silicone bag during storage, and apply rust proof oil to the contact surface;
Regularly check the cleanliness of the threads (by blowing with high-pressure gas to prevent impurities from accumulating).
Emergency response plan:
Rusted threads can be softened with WD-40 penetrant and cleaned with a nylon brush; Severe corrosion requires cutting off the damaged section and re tapping.
Accurate selection guide:
Working pressure ≤ 80% of the nominal pressure of the joint (e.g. 50MPa grade joint is selected for 35MPa system);
An additional 30% margin is added for impact conditions, and the pressure in high-temperature environments is converted based on the temperature coefficient (reduced by 20% for every 100 ℃).
Strengthen testing verification:
Provide a third-party pressure pulse test report (such as no leakage after 100000 0.5Hz square wave tests);
Add safety relief valves to critical areas (set value<10% of maximum system pressure).
Structural optimization suggestions:
Adopting a double-layer sealing structure (main seal+buffer ring) to absorb pressure fluctuations;
Thickened pipe wall material (such as high-pressure hose joint SC5S outer diameter ≥ 25mm).
Standardized control measures:
Establish a thread identification system (laser print "NPT-1/2-28UNF" on the joint);
Provide a size comparison table (including ISO/ANSI/DIN standard conversion parameters).
Precision detection equipment:
Use an electronic thread gauge (accuracy ± 0.01mm) to detect the tooth profile angle (60 ° or 55 °);
The ovality of the tube body is ≤ 0.05mm (it is recommended to submit samples for retesting before procurement).
Professional installation guidance:
Adopting the torque step method (initial torque 50% → compound torque 100% → final torque 120%);
It is recommended to use a hydraulic torque wrench (with an accuracy of ± 3%) in conjunction with a fixed torque socket.
